Static bars

What Is a Shockless Bar?

Shockless static eliminators are designed with ionizing points, or emitters, that are capacitively coupled to the high voltage source. This limits the current at the points to a very low level. Direct contact with a point will not result in an electrical shock sensation. Shockless or current limited static eliminators should be used in installations where contact with personnel is likely.

Product Information

P-Sh-N-Ex anti-static bar

This type of anti-static bar is highly effective and, with its long range, ideal for neutralization of static electricity on materials when the distance varies. The construction of the bar is so rigid that bending of extremely long bars in only minimal.

P-Sh-N-Ex is equipped with an integral power unit, so a high-voltage cable is not needed. This anti-static bar has been approved for use in certain explosion-hazardous environments.

The 5m long primary cable can be connected to the mains voltage. A neon bulb indicates that high voltage is present.

Under certain conditions the P-SH-N-Ex bar is capable of neutralizing the materials from a maximum distance of 200mm.

Available in sizes from 10cm up to about 4 meters.