Static bars

What Is a Shockless Bar?

Shockless static eliminators are designed with ionizing points, or emitters, that are capacitively coupled to the high voltage source. This limits the current at the points to a very low level.

Direct contact with a point will not result in an electrical shock sensation. Shockless or current limited static eliminators should be used in installations where contact with personnel is likely.

Product Information

P-Sh-N

The PSH-N Static Control Bar is a high output, shockless static eliminator with two parallel rows of pins.

The static control bar offers maximum strength, rigidity, and ruggedness. The sag rate of the PSH-N is less than 1/2 inch over 10 feet of bar length.

The PSH-N Static Control Bar is popular for a wide variety of applications, and is particularly preferred for long distance applications, such as on bag machine wicketers, since the static bar can be mounted up to 6 inches from the target material.

The PSH-N requires a power supply for operation, which must be ordered separately.

CE approved when equipped with shielded cable.

Available in sizes from 10cm up to about 4 meters.