Static bars

What Is a Shockless Bar?

Shockless static eliminators are designed with ionizing points, or emitters, that are capacitively coupled to the high voltage source. This limits the current at the points to a very low level.

Direct contact with a point will not result in an electrical shock sensation. Shockless or current limited static eliminators should be used in installations where contact with personnel is likely.

Product Information

P-Sh anti-static bar

Each high voltage point of this anti-static bar is individually capacitively coupled to the H.T. voltage. This results in no sensation of shock when any point is accidentally touched.

A further advantage is that the bar continues to function properly even when a few points are short-circuited, e.g. due to dirt.

It has 2 ionizing electrodes and 3 metal electrodes. The metal electrodes are grounded. The total length of this bar is a minimum of 130mm longer than the effective length.

The P-Sh bar under certain conditions can neutralize from a maximum distance of 600mm. Operating voltage 7.5kV+/- 10%.

Available in sizes from 10cm up to about 4 meters.