CM-1: Construction Mop.
A low cost PVA string mop designed specifically for cleanroom construction.
CM-1: Construction Mop
CM-2: Construction Mop.
A low cost NovaLite string mop designed specifically for cleanroom construction. Autoclavable
CM-2: Construction Mop
CCSC-1: Curtain Cleaner PVA.
Absorbent, low-linting slip cover. Cleans vinyl curtains to a dry, spot free finish. Ideal for semiconductor and wafer manufacture. Holds up to multiple laundry cycles. 12" length. PVA cover not compatible with IPA. Attaches to Curtain Cleaner Handle CCH-48
CCSC-1: Curtain Cleaner PVA
CCSC-2: Curtain Cleaner NovaLite.
Hard-wearing, low-linting slip cover. Cleans vinyl curtains to a dry, spot free finish. Ideal for medical device and pharmaceutical applications. Can be used with alcohol and strong disinfectants. 12" length. Autoclavable. Attaches to Curtain Cleaner Handle CCH-48
CCSC-2: Curtain Cleaner NovaLite
CCSC-6: Curtain Cleaner NovaPoly.
Low-linting polyester covered foam slip cover to clean or apply disinfectant to cleanroom curtains and softwalls. Can be laundered and re-used. Resistant to strong disinfectants and steam sterilization. 12" in width. Attaches to Curtain Cleaner Handle CCH-48.
CCSC-6: Curtain Cleaner NovaPoly
CCSC-68: Curtain Cleaner PolyMesh.
Heavy duty, abrasive slip cover for heavy soils and light industrial cleanroom curtains. Resistant to strong disinfectants. Holds up to multiple laundry cycles. 12" length. Attaches to Curtain Cleaner Handle CCH-48.
CCSC-68 Curtain Cleaner PolyMesh
EM-1: ErgoMop PVA.
A roller mop with beveled edges which will effectively clean the ErgoMat anti-static and anti-fatigue line of floor coverings. Use dry for a strong brushing effect or wet for increased particulate removal. Works well on raised and grid flooring. Not compatible with IPA.
EM-1: ErgoMop PVA
EM-2: ErgoMop NovaLite.
A roller mop with beveled edges which will effectively clean the ErgoMat anti-static and anti-fatigue line of floor coverings. Use dry for a strong brushing effect or wet for increased particulate removal. works well on raised and grid flooring. Can be used with strong cleaning agents and disinfectants. Autoclavable.
EM-2: ErgoMop NovaLite
ML-1: MicroLoop Mop.
A low cost loop mop in PVA material.
ML-1: MicroLoop Mop -PVA
ML-9: MicroLoop Mop
A low cost loop mop in PolyGen material. Autoclavable
ML-9: MicroLoop Mop -Polygen
CRM-1: MicroMop - PVA.
Cleanroom mop with an absorbency of 600% and drying time of 10-20 seconds. Ideal for semiconductor and microelectronic cleaning applications where a dry, residue free surface is essentical. Not compatible with IPA.
CRM-1: MicroMop - PVA
CRM-2: MicroMop - NovaLite
A hard-wearing floor mop for controlled environments and cleanroom support areas. The NovaLite latex/rayon blend will retain its absorbency and efficiency over multiple uses. Autoclavable, the CRM-2 is suited to pharmaceutical and medical device applications. Resistant to strong disinfectants. Can be autoclaved.
CRM-2: MicroMop - NovaLite
CRM-6: MicroMop - Polyester.
An absorbent polyester mop, laser cut to minimize particulate. The special polyester weave efficiently wicks away moisture. Concealed foam brick at the top of the mop offers dual-cleaning action for high-traffic areas. Holds up to strong disinfectants and is autoclavable.
CRM-6: MicroMop - Polyester
NM-1: NovaMop - PVA.
Extremely low-linting roller mop head offering excellent absorbency combined with fast-drying properties. Mop head free rolls forward and locks on reverse roll to squeegee the surface being cleaned. Ideal for semiconductor and microelectronics where surfaces must be cleaned to a dry finish.
NM-1: NovaMop - PVA
NM-2: NovaMop-NovaLite.
Absorbent, hard-wearing roller mop head which has applications in both hi-tech and medical device applications. Mop head free rolls forward and locks on reverse roll to squeegee surface being cleaned.
NM-2: NovaMop-NovaLite
NM-6: NovaMop - Polyester.
Polyester/sponge roller mop head which has applications in both hi-tech and bio-tech facilities. Ideal for applying sterilants and disinfectants, the two ply polyester cover allows for optimum wetting. Attaches to QDNH-1 adapter for effective roll/lock cleaning operation. Autoclavable.
NM-6: NovaMop - Polyester
SLP6-9, SLP6-14: PadMop.
This covered sponge mop is designed to apply the optimum amount of disinfectant in a pharmaceutical production or aseptic processing area. The brick style mop fits onto the SlimLine QDSL adapters creating a fully padded mop head to cope with large surface areas as well as shelving, door jambs and corners.
SLP6-9, SLP6-14: PadMop
PM-648: PilloMop - Flat Pad.
Slimline polyester flat pad mop head for use on its own or with the PMC 648 polyester slip cover. The slimline design is ideal for applying disinfectants to walls chambers and workstations.Autoclavable.
PM-648: PilloMop
PM-1: PilloMop - PVA.
An absorbent, low-linting, flat-pad mop for semiconductor, wafer manufacture and aerospace applications. The PVA cover has 600% absorbency. The PilloMop is ideal for cleaning shelving, walls and behind and below process equipment. Avoid chlorines and IPA.
PM-1: PilloMop -pva
PM-2: PilloMop - NovaLite.
Absorbent, hard-wearing, low-linting flat pad mop for walls, shelving and hard-to-reach areas. Can be used with alcohol and strong disinfectants. Autoclavable.
PM-2: PilloMop -novalite
PM-6: PilloMop - Polyester.
Polyester covered flat-pad mop head for critical and sterile applications. Ideal for cleaning chambers, isolators, walls and hard-to-reach areas. Can be used to apply sterilants and disinfectants. Autoclavable.
PM-6: PilloMop -polester
PMC-648: PilloMop - Slip Cover.
Polyester slip cover for use with PM 648 PilloMop mop head. Designed for ultra-critical environments where clean-passes must be ensured. The elasticized slip cover can be pre-moistened, bagged and used as necessary.
PMC-648: PilloMop -slipcover
PG9-12IR: PolyGen Mop Irradiated.
A functional mop made up of low-linting polyester looped strands. The herringbone weave of the strand ensures no raw edges, guaranteeing low particulation. Gamma irradiated, with full validation.
PG9-12IR: PolyGen Mop Irradiated
PG9-12: PolyGen Mop.
An economical low-linting 100% polyester mop. The herringbone weave in the looped strands ensures no raw edges, guaranteeing low particulation. The PolyGen is absorbent enough to clean to a dry finish but can also be used to apply those disinfectants that require an extended drying time
PG9-12: PolyGen Mop
PHU-110,PHU-114: PowerHead Dense Urethane Foam
Disposable sponge mop head for cleanroom support areas. Has two distinct cleaning surfaces to offer twice the cleaning potential of standard foam mops.
PHU-110, PHU-114: PowerHead Dense Urethane Foam
PHU-140, PHU-144:PowerHead Ether Foam.
Dense absorbent foam mop head for aseptic and sterile support areas. Disposable. Has two distinct cleaning surfaces to offer twice the cleaning potential of standard foam mops.
PHU-140, PHU-144: PowerHead Ether Foam
PH6-150, PH6-154:PowerHead NovaPoly Covered.
Polyester covered foam mop head for critical applications, pharmaceutical and sterile support facilities. Covered foam minimizes particulation.
PH6-150, PH6-154: PowerHead NovaPoly Covered
PHU-150, PHU-154: PowerHead Wide Pore Foam.
Economical, absorbent foam mop head for pharmaceutical and sterile support areas. Has two distinct cleaning surfaces to offer twice the cleaning potential of standard foam mops.
PHU-150, PHU-154: PowerHead Wide Pore Foam
PHU-120,PHU-124: PowerHead Yellow Foam.
Heavy duty, absorbent foam mop head for pharmaceutical and sterile support areas. Has two distinct cleaning surfaces to offer twice the cleaning potential of standard foam mops.
PHU-120, PHU-124: PowerHead Yellow Foam
PHU-160,PHU-164: PowerHead Abrasive Poly Pad
Abrasive mesh/foam mop head for heavy duty cleaning, residues and cleanroom construction. Ideal for veterinary and animal laboratories.
PHU-160, PHU-164: PowerHead Abrasive Poly Pad
SLSC2-9,SLSC2-14,SLSC2-18: SlimLine 2000 NovaLite Cover
Novalite slip-cover with urethane foam interior.
SLSC2-9, SLSC2-14, SLSC2-18: SlimLine 2000 NovaLite Cover
SLSC6-9,SLSC6-14,SLSC6-18: SlimLine 2000 NovaPoly Cover
Polyester slip cover with enclosed seams and urethane foam interior.
SLSC6-9,SLSC6-14,SLSC6-18 : SlimLine 2000 NovaPoly Cover
SLSC68-9,SLSC68-14,SLSC68-18: SlimLine 2000 PolyMesh Cover
PolyMesh slip cover with urethane foam interior. For heavy duty cleaning tasks, high traffic areas, staining and chemical residues.
SLSC68-9, SLSC68-14, SLSC68-18: SlimLine 2000 PolyMesh Cover
SLSC1-9,SLSC1-14,SLSC1-18: SlimLine 2000 PVA Cover
PVA cover with urethane foam interior. A low linting mop with excellent absorbency that will hold up to multiple laundry cycles.
SLSC1-9,SLSC1-14,SLSC1-18: SlimLine 2000 PVA Cover
T2-10,T2-14,T2-18: T' Mop NovaLite Cover.
Low-profilehard-wearing mop head. Ideal for applying disinfectant or squeegeeing to a dry finish.
T2-10, T2-14, T2-18: T' Mop NovaLite Cover
T6-10,T6-14,T6-18: T' Mop NovaPoly Cover
Low-profile polyester mop head. Ideal for applying disinfectant. Will hold up to multiple launderings/autoclaves.
T6-10, T6-14, T6-18: T' Mop NovaPoly Cover
T1-10,T1-14,T1-18: T' Mop PVA Cover
Low-profile mop head. Low-linting, fast drying and absorbent. Launderable and re-usable.
T1-10,T1-14, T1-18: T' Mop PVA Cover
TM-9: TwistMop Head Polyester
An economical self-wringing mop that cuts back on cleaning time and unnecessary hardware in the cleanroom. Ideal for laying down disinfectant.
TM-9: TwistMop Head Polyester
TM-1: TwistMop Head PVA
Self-wringing mop that cuts back on cleaning time and unnecessary hardware in the cleanroom. Fast-drying and absorbent.
TM-1: TwistMop Head PVA
