Static bars

What Is a Shockless Bar?

Shockless static eliminators are designed with ionizing points, or emitters, that are capacitively coupled to the high voltage source. This limits the current at the points to a very low level.

Direct contact with a point will not result in an electrical shock sensation. Shockless or current limited static eliminators should be used in installations where contact with personnel is likely.

Product information

Ep-Sh-N

Each individual emitter point of this anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the point is accidentally touched.

Another advantage is that the bar continues to function properly when a number of points are short-circuited, for instance due to heavy fouling.

The two metal electrodes are earthed. Under certain conditions the EP-Sh-N bar is capable of neutralizing the electrostatically charged material from a maximum distance of 150 mm.

Available in sizes from 10cm up to about 4 meters.